.png){kind=small}
E20 Ultrasonic cleaner stainless steel
The emmi -E20 with a tank capacity of 2.0L impresses with its stable stainless steeloscillatingtank and stainless steel housing. It is a reliable ultrasonic cleaning device for dental, household, laboratory, ophthalmic optics, nail/tattoo/cosmetic studios, workshops and industry. In the household, spectacles and small parts can also be cleaned gently and effectively in the ultrasonic bath. Hearing aids, dentures, gun parts, jewellery, engine parts, carburettors and many other plastic/glass and stainless steel parts are thoroughly cleaned in the ultrasonic cleaner.
The sweep technology ensures that the best working frequency is always generated, even with changing loads due to load, fill level, temperature and liquid. This creates a particularly homogeneous, uniformly effective ultrasonic field in the entire ultrasonic bath.
The emmi -E20 also has a timer (1-30 min./continuous operation) and a heater (30-80°C). A power control (40% / 60% / 80% / 100%) rounds off the full range of equipment for thorough and efficient cleaning with ultrasound.
In our online shop you will find many other cleaning concentrates for every use, such as for surgical instruments, weapon parts + accessories, glass, ceramics, metals, circuit boards, instruments, carburettors and much more!
In addition, all our ultrasonic units are "Made in Germany"!
Dimensions:
- Unit-Outside (L x W x H): 260 x 150 x 220 mm
- Tub-Inside (L x W x H): 240 x 140 x 65 mm
- Basket-Inside (L x W x H): 230 x 130 x 50 mmBasket Mesh Size (∅): 6 mm
Contents:
- Tub capacity: 2.0 litres
- Working capacity: 1.65 litres
Equipment:
- Oscillating tank: stainless steel 1.4301
- Housing: stainless steel 1.4301
- Degree of protection: IP 32
- Drain tap: No
- Timer: 1-30 min / continuous operation
- Heating: 30-80 °C
- Power regulation: 40% / 60% / 80% / 100%
- Sweep technology: Yes (increase of normal ultrasonic power for particularly heavy soiling)
Technical data:
- Oscillation system: 2 PZT wide-beam oscillation system
- HF generator: overload-proof, constant power
- Operating mode: single half-wave
- Operating frequency: approx. 37 kHz
- Ultrasonic power: max. 160 watts
- Heating power: 100 watts
- Mains voltage: 50 / 60 Hz
- Mains connection: 220 - 240 VWeight: 3kg
- Subject to technical changes! -
Attention!!!
Do not use flammable chemicals, acids, substances containing chloride ions or household cleaners. Do not place objects to be cleaned on the bottom of the tank.
- The General Terms and Conditions of EMAG AG apply without modification.
| Product type: | Ultrasonic cleaner |
|---|
Scope of delivery:
- 1x emmi E20 Ultrasonic cleaner stainless steel
- 1x emmi EM-080 Universal cleaning concentrate 100ml
EM-080
Composition:
Non-ionic surfactants 5-15%.
pH-value of the 1% solution: approx. 6-7. The surfactants contained in the
product are biodegradable
according to the Detergents Ordinance
Labelling according to the Hazardous Substances Ordinance:
H315 Causes skin irritation. H318 Causes
serious eye damage. P280 Wear protective gloves/
Protective clothing/eye protection/face protection
P305+P351+P338
IF IN EYES:
Rinse cautiously with water
for several minutes. Remove any contact lenses
if possible. Continue rinsing
Login